Discussion:
CoffeeLake RVP11: Post code 0x7A "SELF Payload doesn't target RAM:
(too old to reply)
Lance Zhao
2018-10-31 01:08:51 UTC
Permalink
Feels like CoffeeLake RVP11 still been actively uploaded with newer
changes. But at least your coreboot code seems to be outdated, all of those
coffeelake-h related ID(CPUID and MCH/PCHID) had been up-streamed recently.
I will suggest you to sync up your code base and try again.

Lance

On Tue, Oct 30, 2018 at 7:10 AM Jose Trujillo via coreboot <
I am using the "coffeelake RVP11" to test the code on my "non RVP" system.
The payload doesn't load.
1.- Device ID's of the system are still not existant in coreboot.
2.- Misconfigured # of MAX CPU CORES.
3.- Maybe memory is still not properly initialized because RVP platform
uses LPDDR4 and use SPD.bin VS my system that use DDR4 SO-UDIMM on SMB SPD
channel.
Please help me to identify the root of the problem that causes RAM "Failed
Segment"....
Thank you in advance.
Jose Trujillo.
--
https://mail.coreboot.org/mailman/listinfo/coreboot
Lance Zhao
2018-10-31 06:13:42 UTC
Permalink
The "Invalid FSPM signature" at this stage, if FspUpd.h for coffeelake
already there. maybe "XIP mode" had not been selected in config file?
Thank you Lance;
I got back to 4.8.1 because on master of 2 weeks ago I was getting post
code 0x34 "Invalid FSPM signature"; but I will try again.
Coreboot engineers have been doing much work on integrating FSP to
coreboot and may be the reason has been unstable.
Jose.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
Feels like CoffeeLake RVP11 still been actively uploaded with newer
changes. But at least your coreboot code seems to be outdated, all of those
coffeelake-h related ID(CPUID and MCH/PCHID) had been up-streamed recently.
I will suggest you to sync up your code base and try again.
Lance
On Tue, Oct 30, 2018 at 7:10 AM Jose Trujillo via coreboot <
I am using the "coffeelake RVP11" to test the code on my "non RVP" system.
The payload doesn't load.
1.- Device ID's of the system are still not existant in coreboot.
2.- Misconfigured # of MAX CPU CORES.
3.- Maybe memory is still not properly initialized because RVP platform
uses LPDDR4 and use SPD.bin VS my system that use DDR4 SO-UDIMM on SMB SPD
channel.
Please help me to identify the root of the problem that causes RAM
"Failed Segment"....
Thank you in advance.
Jose Trujillo.
--
https://mail.coreboot.org/mailman/listinfo/coreboot
Loading...